Introduction <\/strong><\/h2>While migrating to Telemetry2.0 from DCA telemetry, the traditional log grepping is targetted to reduce as much as possible by instrumenting the markers coming from RDKB components.To achieve this, RDKB components are supposed make required changes with the use of APIs from Telemetry 2.0 shared library.<\/span><\/p>RDKB Telemetry Components<\/strong><\/h2>- Xconf Server<\/li>
- RPI with rdkb image<\/li>
- telemetry2_0<\/li><\/ol>
Environment Setup<\/strong><\/h2>2.1. <\/span><\/span>Build procedure<\/strong><\/h3>Follow the wiki page<\/span> to make yocto’s RDK-B image from yocto workspace in your PC.<\/span><\/p>RDK-B R-Pi Yocto 4.0 – Kirkstone<\/a><\/p>Note: Proceed the build procedure in Ubuntu18 version VM<\/p>
2.2. Pre<\/strong>– requisites for enabling Telemetry2_0 (Version : 2) – Single profile<\/strong><\/h3>Telemetry Version : 2 <\/strong>(by default telemetry version as 1)<\/p>Below are the steps for enabling Telemetry 2.0 in RPI,
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https:\/\/xconf.rdkcentral.com:19092\/loguploader\/getT2Settings<\/a>
4. touch \/nvram\/enable_t2_debug
5. reboot the device
6. pidof “telemetry2_0” – check the running status of telemetry2 <\/p>After board boot up, disable log rotation by using the command: <\/span><\/span><\/p>$ systemctl disable rdkbLogMonitor<\/span><\/p>Below sample screenshots are enabling the T2 process of version 2 in target device(rpi),<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_11-51-33.png\")
<\/span><\/p>After reboot the device,<\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_11-55-17.png\")
<\/span><\/p>Sample Successful logs for Telemetry 2 process Initialization in \/rdklogs\/logs\/telemetry2_0.txt.0 ,<\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_11-59-59.png\")
<\/span><\/p> <\/span>Xconf server<\/strong><\/h2>- Xconf server page : https:\/\/xconf.rdkcentral.com:19093\/admin\/ux<\/a><\/span><\/li>
- With default credentials ‘admin’ as both UserName\/Password<\/li><\/ul>
Configuring Telemetry on Xconf server<\/p>
Change Application to stb in top right corner of the window<\/h3>
<\/span>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2020-3-5_12-33-25.png\")
<\/span><\/span><\/p>Create Formula<\/strong><\/h3> Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu and create Formula<\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-1.png\")
<\/span><\/p>Create Device Settings<\/strong><\/h3>Xconf Server → DCM → Device Settings
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-2.png\")
<\/span><\/p>Create Upload Repository<\/strong><\/h3>Xconf Server → DCM → Upload Repository<\/p>
Upload Repository : HTTPS Server<\/p>
Repository URL: https:\/\/xconf.rdkcentral.com\/xconf\/telemetry_upload.php<\/a><\/span><\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/Upload.png\")
<\/span><\/p>Create LogUpload Settings<\/strong><\/h3>Xconf Server → DCM → LogUpload Settings<\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-4.png\")
<\/span><\/p>Test Page<\/strong><\/h3>Xconf Server → DCM → Test Page<\/p>
In the Test Page, give estbMacAddress(B8:27:EB:1B:56:4C → Mac Address of RPI) and ensure the parameters that has been configured in the DCM.<\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-5.png\")
<\/span><\/p>Create Permanent Profiles<\/strong><\/h3>The markers are of 3 types .<\/span>
1.Split based markers. <\/span>
2. Count based markers<\/span>
3. TR-181 based markers.<\/span><\/p>
RDKB Telemetry Components<\/strong><\/h2>- Xconf Server<\/li>
- RPI with rdkb image<\/li>
- telemetry2_0<\/li><\/ol>
Environment Setup<\/strong><\/h2>2.1. <\/span><\/span>Build procedure<\/strong><\/h3>Follow the wiki page<\/span> to make yocto’s RDK-B image from yocto workspace in your PC.<\/span><\/p>RDK-B R-Pi Yocto 4.0 – Kirkstone<\/a><\/p>Note: Proceed the build procedure in Ubuntu18 version VM<\/p>
2.2. Pre<\/strong>– requisites for enabling Telemetry2_0 (Version : 2) – Single profile<\/strong><\/h3>Telemetry Version : 2 <\/strong>(by default telemetry version as 1)<\/p>Below are the steps for enabling Telemetry 2.0 in RPI,
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https:\/\/xconf.rdkcentral.com:19092\/loguploader\/getT2Settings<\/a>
4. touch \/nvram\/enable_t2_debug
5. reboot the device
6. pidof “telemetry2_0” – check the running status of telemetry2 <\/p>After board boot up, disable log rotation by using the command: <\/span><\/span><\/p>$ systemctl disable rdkbLogMonitor<\/span><\/p>Below sample screenshots are enabling the T2 process of version 2 in target device(rpi),<\/span><\/p><\/span><\/p>After reboot the device,<\/p>
<\/span><\/p>Sample Successful logs for Telemetry 2 process Initialization in \/rdklogs\/logs\/telemetry2_0.txt.0 ,<\/p>
<\/span><\/p> <\/span>Xconf server<\/strong><\/h2>- Xconf server page : https:\/\/xconf.rdkcentral.com:19093\/admin\/ux<\/a><\/span><\/li>
- With default credentials ‘admin’ as both UserName\/Password<\/li><\/ul>
Configuring Telemetry on Xconf server<\/p>
Change Application to stb in top right corner of the window<\/h3>
<\/span><\/span><\/span><\/p>Create Formula<\/strong><\/h3> Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu and create Formula<\/p>
<\/span><\/p>Create Device Settings<\/strong><\/h3>Xconf Server → DCM → Device Settings
<\/span><\/p>Create Upload Repository<\/strong><\/h3>Xconf Server → DCM → Upload Repository<\/p>
Upload Repository : HTTPS Server<\/p>
Repository URL: https:\/\/xconf.rdkcentral.com\/xconf\/telemetry_upload.php<\/a><\/span><\/span><\/p><\/span><\/p>Create LogUpload Settings<\/strong><\/h3>Xconf Server → DCM → LogUpload Settings<\/p>
<\/span><\/p>Test Page<\/strong><\/h3>Xconf Server → DCM → Test Page<\/p>
In the Test Page, give estbMacAddress(B8:27:EB:1B:56:4C → Mac Address of RPI) and ensure the parameters that has been configured in the DCM.<\/p>
<\/span><\/p>Create Permanent Profiles<\/strong><\/h3>The markers are of 3 types .<\/span>
1.Split based markers. <\/span>
2. Count based markers<\/span>
3. TR-181 based markers.<\/span><\/p>
Environment Setup<\/strong><\/h2>2.1. <\/span><\/span>Build procedure<\/strong><\/h3>Follow the wiki page<\/span> to make yocto’s RDK-B image from yocto workspace in your PC.<\/span><\/p>RDK-B R-Pi Yocto 4.0 – Kirkstone<\/a><\/p>Note: Proceed the build procedure in Ubuntu18 version VM<\/p>
2.2. Pre<\/strong>– requisites for enabling Telemetry2_0 (Version : 2) – Single profile<\/strong><\/h3>Telemetry Version : 2 <\/strong>(by default telemetry version as 1)<\/p>Below are the steps for enabling Telemetry 2.0 in RPI,
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https:\/\/xconf.rdkcentral.com:19092\/loguploader\/getT2Settings<\/a>
4. touch \/nvram\/enable_t2_debug
5. reboot the device
6. pidof “telemetry2_0” – check the running status of telemetry2 <\/p>After board boot up, disable log rotation by using the command: <\/span><\/span><\/p>$ systemctl disable rdkbLogMonitor<\/span><\/p>Below sample screenshots are enabling the T2 process of version 2 in target device(rpi),<\/span><\/p><\/span><\/p>After reboot the device,<\/p>
<\/span><\/p>Sample Successful logs for Telemetry 2 process Initialization in \/rdklogs\/logs\/telemetry2_0.txt.0 ,<\/p>
<\/span><\/p> <\/span>Xconf server<\/strong><\/h2>- Xconf server page : https:\/\/xconf.rdkcentral.com:19093\/admin\/ux<\/a><\/span><\/li>
- With default credentials ‘admin’ as both UserName\/Password<\/li><\/ul>
Configuring Telemetry on Xconf server<\/p>
Change Application to stb in top right corner of the window<\/h3>
<\/span><\/span><\/span><\/p>Create Formula<\/strong><\/h3> Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu and create Formula<\/p>
<\/span><\/p>Create Device Settings<\/strong><\/h3>Xconf Server → DCM → Device Settings
<\/span><\/p>Create Upload Repository<\/strong><\/h3>Xconf Server → DCM → Upload Repository<\/p>
Upload Repository : HTTPS Server<\/p>
Repository URL: https:\/\/xconf.rdkcentral.com\/xconf\/telemetry_upload.php<\/a><\/span><\/span><\/p><\/span><\/p>Create LogUpload Settings<\/strong><\/h3>Xconf Server → DCM → LogUpload Settings<\/p>
<\/span><\/p>Test Page<\/strong><\/h3>Xconf Server → DCM → Test Page<\/p>
In the Test Page, give estbMacAddress(B8:27:EB:1B:56:4C → Mac Address of RPI) and ensure the parameters that has been configured in the DCM.<\/p>
<\/span><\/p>Create Permanent Profiles<\/strong><\/h3>The markers are of 3 types .<\/span>
1.Split based markers. <\/span>
2. Count based markers<\/span>
3. TR-181 based markers.<\/span><\/p>
Follow the wiki page<\/span> to make yocto’s RDK-B image from yocto workspace in your PC.<\/span><\/p> RDK-B R-Pi Yocto 4.0 – Kirkstone<\/a><\/p> Note: Proceed the build procedure in Ubuntu18 version VM<\/p> Telemetry Version : 2 <\/strong>(by default telemetry version as 1)<\/p> Below are the steps for enabling Telemetry 2.0 in RPI, After board boot up, disable log rotation by using the command: <\/span><\/span><\/p> $ systemctl disable rdkbLogMonitor<\/span><\/p> Below sample screenshots are enabling the T2 process of version 2 in target device(rpi),<\/span><\/p> After reboot the device,<\/p> Sample Successful logs for Telemetry 2 process Initialization in \/rdklogs\/logs\/telemetry2_0.txt.0 ,<\/p> Configuring Telemetry on Xconf server<\/p> <\/span> Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu and create Formula<\/p> Xconf Server → DCM → Device Settings Xconf Server → DCM → Upload Repository<\/p> Upload Repository : HTTPS Server<\/p> Repository URL: https:\/\/xconf.rdkcentral.com\/xconf\/telemetry_upload.php<\/a><\/span><\/span><\/p> Xconf Server → DCM → LogUpload Settings<\/p> Xconf Server → DCM → Test Page<\/p> In the Test Page, give estbMacAddress(B8:27:EB:1B:56:4C → Mac Address of RPI) and ensure the parameters that has been configured in the DCM.<\/p> The markers are of 3 types .<\/span>2.2. Pre<\/strong>– requisites for enabling Telemetry2_0 (Version : 2) – Single profile<\/strong><\/h3>
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https:\/\/xconf.rdkcentral.com:19092\/loguploader\/getT2Settings<\/a>
4. touch \/nvram\/enable_t2_debug
5. reboot the device
6. pidof “telemetry2_0” – check the running status of telemetry2 <\/p><\/span><\/p><\/span><\/p><\/span><\/p> <\/span>Xconf server<\/strong><\/h2>
Change Application to stb in top right corner of the window<\/h3>
<\/span><\/span><\/p>Create Formula<\/strong><\/h3>
<\/span><\/p>Create Device Settings<\/strong><\/h3>
<\/span><\/p>Create Upload Repository<\/strong><\/h3>
<\/span><\/p>Create LogUpload Settings<\/strong><\/h3>
<\/span><\/p>Test Page<\/strong><\/h3>
<\/span><\/p>Create Permanent Profiles<\/strong><\/h3>
1.Split based markers. <\/span>
2. Count based markers<\/span>
3. TR-181 based markers.<\/span><\/p>
![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/Profile.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-7.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-8.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/T2-9.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-26_20-6-4.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-26_20-10-10.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_12-2-43.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_12-4-19.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_12-16-32.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_12-9-47.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_12-23-5.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_13-6-13.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_13-7-8.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_13-7-25.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_13-13-30.png\")
<\/span><\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_13-16-49.png\")
<\/span><\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_17-5-33.png\")
<\/span><\/p>![](\"\/wp-content\/uploads\/sites\/16\/2024\/12\/image2021-5-27_17-6-11.png\")
<\/span><\/p>