RDK Ppp Manager
Architecture
The following diagrams show how WAN Manager will communicate with PPP Manager to set up PPP connections.
Fixed WANoE (PPPoE)
This diagram shows how a PPPoE connection should be established for a WANoE interface in Fixed Mode.
This sequence applies to all PPPoE connections (including PPPoEoA), regardless of the base interface.

The Device.X_RDK_WanManager.CPEInterface.{i}. data model is expected to be configured as follows:
| Index | Name | Wan Priority | PPP Link Type | Active Link | 
|---|---|---|---|---|
| 1 | eth3 | 0 (highest) | PPPoE | True | 
Fixed ADSL (PPPoA)
This diagram shows how a PPPoA connection should be established for an ADSL interface in Fixed Mode.
This sequence applies to all PPPoA connections (not including PPPoEoA), regardless of the base interface. Note: VLAN interfaces will not be created for PPPoA connections. The PPP interface will be created directly on top of the base ATM interface.

The Device.X_RDK_WanManager.CPEInterface.{i}. data model is expected to be configured as follows:
| Index | Name | Wan Priority | PPP Link Type | Active Link | 
|---|---|---|---|---|
| 1 | atm0 | 0 (highest) | PPPoA | True | 


